Awesome Miner is compatible with and can monitor all standard compliant ASIC miners. The list below gives an overview of specific operations where the support will depend on the ASIC hardware being used. See complete list of all supported ASIC mining hardware.
Change default pools
- Avalon 1000/1100/1200-series
- Bitmain Antminer
- Goldshell
- Innosilicon
- MicroBT Whatsminer
- Any ASIC miner with SSH enabled with configuration based on cgminer.conf
Reboot
- Avalon 1000/1100/1200-series
- Bitmain Antminer
- Goldshell
- Innosilicon
- MicroBT Whatsminer
- Any ASIC miner with SSH enabled
LED flash on/off
- Avalon 1000/1100/1200-series
- Bitmain Antminer S15, T15, S17, T17, Z15, L7
- Bitmain Antminer running Awesome Miner Antminer firmware
- MicroBT Whatsminer
Pause mining / Resume mining
- Avalon 1000/1100/1200-series
- Bitmain Antminer running Awesome Miner Antminer firmware (except Antminer L3+)
- Bitmain Antminer S15, T15, S17, T17, S19
- MicroBT Whatsminer
Run SSH commands
- Any ASIC miner with SSH enabled
Configure CgMiner API access
- Bitmain Antminer with SSH enabled
- Any ASIC miner with SSH enabled with configuration based on cgminer.conf
Update firmware
- Bitmain Antminer
- Innosilicon
- MicroBT Whatsminer
Change web password
- Bitmain Antminer
- Innosilicon
- MicroBT Whatsminer